All Jambs are Supplied Pre Primed (Gesso Coated)

Required Tools and Accessories

Drill and Phillips Drill Bit

For connecting Side and Top Jambs

For attaching door to jamb using 

Quick Door Hanger

Spirit Level and Pencil

For Marking Straight Line on 

Plaster Board Prior to installing

Duo Door in Final Position

Quick Door Hanger

Install your door in

under 5 Minutes


Connecting Door Stop to Jamb

Supplied Parts

Side Jambs




Door Stops

2 Sides

1 Top

Door Hinged

Both Faces Primed

4 Edges Un Primed

Top Jamb

Connector Plates

pre attached

Screws Included

Connector Plate

Jolt Nails

For attaching 

Door Stop to Jamb

Retail: 760mm Duo Door Single Hung

Assembly Instructions

LEFT                                RIGHT


Slide the top Jamb over both side Jambs.,

Ensure that the Hinge Button is facing up.


Screw the shorter screws through the connector plate into the side jambs. Make sure both side Jambs are firmly inserted.

The longer screws are to be placed in the top centre hole if required.

6: Grab the Quick Door Hanger and follow the instructions.                               Click Here.

Your Door is now Assembled.

Now to install


Your Door is now Installed.

Now to Add the Door Stops.


On the non hinged side of door, hold door in closed position.

Line up supplied door stops and nail then to Jamb in the  position required.


Decide what side you want the hinge on when door in place.  Choosing the hanging is easy. Stand on the side you that the hinges

are visible when door would be closed. The side the hinge is on is thehanging. Hinge on Left, Left Hung. Hinge on Right, Right Hung


Lay door on ground next to Door Jamb with Hinge Piece on. Have both hinge pieces facing up, slide pieces into place.


Position each hinge piece as pictured.

Place pin in top and slide in hinge.

Slightly tapping with hammer. 

Repeat for all three hinges.