CEAM 3D Invisible Hinge - BAC1230MB - Matt Black
Wide Throw Max Weight 85kg @ 900mm
 
The reversible hinge for doors with thickness from 35 to 45 mm
With a gap between the two wings of 23mm, 1230s is the 3D hinge for reversible doors or for overcoming skirting boards, architraves or coverings.
 
Height: 130 mm
Width: 30 mm
Depth: Only 21mm deep
Suitable for doors made of: Wood, Aluminum, Steel
Minimum door thickness: 35 mm
Narrow Timber Rebate: 
Gap when Closed:
Load Capacity: up to 85kg @ 900mm (Subject to door specs, see weight chart)
    Load capacity 2 hinges: 55 kg
    Load capacity 3 hinges: 70 kg
Working Aperture:
Reliability: Certified to 200,000 cycles
Fully 3D adjustable system on three axis
Ceam Quick release system
Multiple Finishes
Made in Italy for over 50 Years (100%)
Router Template Available for easy installation and slot symmetry.
Suitable for Internal and covered External locations.
Suitable for Residential, Commercial & Industrial Locations
 
Ceam hinges are produced in Italy and tested according to the norm EN1935.
In some cases, the use of a fourth hinge may be decisive for the load capacity, especially in case of large widths (>1000 mm) or heights (>2700 mm), on which Ceam suggests to install the fourth hinge in the upper part, 250 mm from the first one.
DOOR CLOSER.
Ceam suggests to always install a third or fourth hinge in the upper part of the door in the presence of door closers. More specifically, as per the European reference standard EN1935, when calculating the load capacity:- With door closers without brake on opening, consider +20% compared to the real mass of the door.- With door closers with opening brake (backcheck) consider +75% compared to the real mass of the door. In case of door height >3000 mm or special uses.