All Jambs are Supplied Pre Primed (Gesso Coated)

Required Tools and Accessories

Drill and Phillips Drill Bit

For connecting Side and Top Jambs

For attaching door to jamb using 

Quick Door Hanger

Spirit Level and Pencil

For Marking Straight Line on 

Plaster Board Prior to installing

Duo Door in Final Position

Quick Door Hanger

Install your door in

under 5 Minutes


Tapping Pin into Hinge

Supplied Parts

All timber components Pre Primed ready for Finishing Coats. (Door, Jambs & Stops)

Side Jambs

Hinged & Striker.

Door Stop Pre attached

Door Hinged

All 6 edges Primed and Finishing Coat ready.

Top Jamb

Connector Plates

pre attached

Screws Included

Connector Plate

Retail: 760mm Duo Door Deluxe Single Hung

Assembly Instructions

LEFT                                RIGHT


Slide the top Jamb over both side Jambs.,

Ensure that the Hinge Button is facing up.


Screw the shorter screws through the connector plate into the side jambs. Make sure both side Jambs are firmly inserted.

The longer screws are to be placed in the top center hole only if required.

6: Grab the Quick Door Hanger, comes free with deluxe model

                                                        and follow the instructions.                               Click Here.

Your Door is now Assembled.

Now to install



Decide what side you want the hinge on when door in place.  Choosing the hanging is easy. Stand on the side you that the hinges

are visible when door would be closed. The side the hinge is on is thehanging. Hinge on Left, Left Hung. Hinge on Right, Right Hung


Lay door on ground next to Door Jamb with Hinge Piece on. Have both hinge pieces facing up, slide pieces into place.


Position each hinge piece as pictured.

Place pin in top and slide in hinge.

Slightly tapping with hammer. 

Repeat for all three hinges.

Without Door Attached

With Door Attached